Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterCGI Door Installation: The Hialeah Gardens Owner’s Guide
CGI door installation in Hialeah Gardens typically runs $1,800-$4,200 for a complete entry system, depending on impact rating, frame material, and whether the rough opening needs reframing. We stock CGI-compatible frames, sashes, and hardware on our trucks, and most replacements ordered by 10 a.m. are installed within 48 hours. Most Hialeah Gardens homeowners discover their CGI door is failing when the multipoint lock no longer draws the slab tight against the jamb, or when they notice daylight showing between the weatherstripping and the frame after a storm.
Which CGI Models This Applies To
CGI manufactures three primary door series we install in Hialeah Gardens: the Estate Collection (aluminum-impact entry doors), the Sentinel Series (thermally broken aluminum), and the commercial-grade Targa line. The Estate Collection uses a 4-9/16″ jamb depth as standard, while the Sentinel runs 5-1/4″ to accommodate the thermal break; swapping one series for another without reframing the rough opening will leave the interior trim proud of the drywall by a half-inch or more. We identify the correct replacement by the etched mark on the hinge side of the frame, which carries a six-digit lot number and the series code. The multipoint locking hardware differs between Estate and Sentinel: Estate uses a two-point lock with a 45mm backset, Sentinel uses a three-point with 55mm. We source OEM multipoint hardware from CGI’s Miami distribution center, but for rollers, hinges, and weatherstripping we use quality aftermarket equivalents that match the original spec at lower cost. One compatibility gotcha we see in Hialeah Gardens: the Targa commercial slab is 2-1/4″ thick, and many residential rough openings framed in the 1980s for 1-3/4″ slabs will not accept it without jamb extension or full reframing.
Signs Your CGI Door Installation Is Failing
- The slab drags or binds at the threshold. This usually means the adjustable sill cap has compressed or the hinge screws have backed out of the frame. In Hialeah Gardens, the limestone aggregate in our concrete foundations transmits vibration from heavy traffic on NW 87th Avenue, and we’ve found hinge screws loosen on east-facing doors faster than any other orientation.
- Daylight visible around the perimeter in daylight. The Q-Lon weatherstripping on CGI doors has a service life of roughly 8-12 years in South Florida UV. Once the compression set exceeds 30%, the seal fails and the air conditioning load rises measurably.
- Multipoint lock handle rotates but does not engage the deadbolt. The gearbox inside the mortise lock strips gradually; we see this most often on doors that are slammed rather than closed against the weatherstripping compression. The gearbox is replaceable separately from the full multipoint system.
- Condensation between the glass panes. CGI’s impact glass uses a warm-edge spacer; if the seal fails, the desiccant saturates and fogging appears first at the bottom edge where moisture pools. This is not a frame issue but a glazing issue, and the sash must be re-glazed or replaced.
- The door opens on its own or will not stay open. The closer arm or the floor-mounted spring hinge has lost hydraulic pressure. On CGI’s heavier impact-rated slabs, the closer must be rated for the actual slab weight; an undersized closer will fail in 18-24 months.
Before
AfterReplacement Cost & What’s Included
| Component | Price Range (Installed) |
|---|---|
| CGI Estate entry door, standard size, impact-rated | $1,800 - $2,800 |
| CGI Sentinel thermally broken entry door | $2,400 - $3,600 |
| Targa commercial slab with hardware | $3,200 - $4,200 |
| Reframe rough opening (if needed) | $400 - $900 |
| Multipoint lock replacement (hardware only) | $280 - $450 |
| Weatherstripping replacement, full perimeter | $180 - $320 |
The range depends on three factors: whether the existing frame is square within 1/8″ on the diagonal, whether the interior and exterior trim must be replaced or can be reused, and whether the door is a standard 3/0 x 6/8 or a custom size requiring a shop order. Every quote we write in Hialeah Gardens is generated from the measured survey the customer keeps; the written scope and the final invoice reference the same document. Haven Clause 1: the price before any work starts is the price after the job is done. The 365-Day Done Right Promise covers all installation labor, and the CGI manufacturer’s warranty covers the product itself.
DIY or Call Us?
An owner can safely check three things: whether the hinge screws are tight, whether the sill cap is adjusted to the correct height (a dime should slide with slight resistance), and whether the weatherstripping retains its original profile or has flattened permanently. What goes wrong with DIY on CGI doors starts with the multipoint lock mortise, which requires a specific router jig and a 22mm bit most homeowners do not own. The second failure point is the impact glass: the laminated pane weighs 8-12 pounds per square foot, and a 3/0 x 6/8 slab can exceed 200 pounds. Dropping it damages the frame, the floor, and possibly the person underneath. We are an independent service provider, not affiliated with CGI. If your door is binding, leaking, or the lock has failed, call (786) 321-3812 and we will schedule a measured survey. The written quote is yours to keep whether you hire us or not.
FAQs
A properly installed CGI impact door in Hialeah Gardens typically lasts 20-25 years for the frame and sash, with hardware and weatherstripping needing replacement at 8-12 years. The salt-laden air from Biscayne Bay accelerates corrosion on non-anodized hardware, which is why we specify stainless or anodized replacements. Call (786) 321-3812 for an exact quote on your door - estimates are free.
Hardware, weatherstripping, and glazing can be repaired or replaced independently; the frame itself is rarely repairable if it has corroded through at the sill or warped from water intrusion. We assess this during the measured survey and note which components can be salvaged. Call (786) 321-3812 for an exact quote - estimates are free.
A standard replacement in an existing square rough opening takes 4-6 hours; if reframing is required, expect one full day. We do not promise same-day completion on full door replacements because the slab must be hung plumb, the multipoint lock mortised precisely, and the hardware adjusted before we leave. Call (786) 321-3812 to schedule your measured survey.
We stock common CGI hardware, weatherstripping, and glazing components on our trucks; complete slabs are ordered from CGI’s Miami distribution center with a 5-10 business day lead time for standard sizes, 3-4 weeks for custom. We also stock parts for PGT, CWS, and ES Windows. Call (786) 321-3812 to confirm availability for your specific model.
Sonia Raman and our crew have replaced CGI doors across Hialeah Gardens, from the single-story homes near Palm Springs North where the original aluminum frames have finally fatigued, to the newer construction west of Okeechobee Road where owners are upgrading to thermally broken Sentinels. Measure once, document it, then measure again. That’s how we work.
Ready for a written price before any tool is lifted? Call (786) 321-3812 to schedule your free measured survey. You’ll keep the document, and the quote will not change once work begins.
Written by Sonia Raman, Owner, Sightline Windows & Doors Hialeah Gardens at Sightline Windows & Doors Hialeah Gardens, serving Hialeah Gardens and nearby areas.