Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterWindows & Doors in Davie, FL
Window and door installation in Davie runs $650-$2,800 per opening depending on product tier and framing condition, with most full-home projects spanning 12-22 units across ranch-era and CBS tract homes built before 1992. Because Davie sits entirely within Broward County’s High Velocity Hurricane Zone, every replacement must carry a Miami-Dade or Florida HVHZ Notice of Acceptance - a stricter standard than inland Florida and not required in neighboring Palm Beach County. We measure every opening on site, write the price before any work starts, and leave a documented photo record - the same process we’ve applied to 18,000+ openings since founding Sightline under the Haven Standard in 2012. Call (786) 321-3812 to schedule your free measured survey.
Why Davie Homes Are Different
Davie’s housing stock is overwhelmingly concrete block and stucco single-family homes built between the late 1960s and early 1990s on large lots preserved by equestrian and ranch zoning. Most still carry original narrow-profile aluminum single-pane windows and hollow-core or louvered exterior doors installed before post-Andrew code overhauls. Sitting 12-15 miles inland, Davie avoids the salt-spray corrosion that destroys coastal frames in Hollywood or Fort Lauderdale, but Atlantic hurricane tracks and daily summer convective storms drive wind-borne rain hard into aging perimeter seals. Year-round humidity above 70% accelerates seal failure and thermal expansion warping in older sliding glass door tracks.
The distinctive pressure on Davie homeowners comes from rear screened enclosures and “Florida rooms” permitted in the 1980s under pre-HVHZ codes. Their jalousie windows and thin aluminum sliders now fail Citizens and private carrier wind-mitigation inspections, making insurance-renewal ultimatums - not voluntary upgrades - the single most common reason residents call a window contractor. Every replacement must meet HVHZ certification, which limits product lines and raises installation standards compared to non-HVHZ markets.
Our Main Davie Services
These are the three services Davie homeowners request most often, each with its own detailed page.
Window Replacement in Davie
We replace original single-pane aluminum windows in Davie’s ranch-era and CBS homes with HVHZ-compliant impact or energy-efficient units, measured to the exact rough opening and specified from PGT, CGI, CWS, or ES Windows lines. Every job begins with a survey the customer keeps, and the written quote matches that document exactly - Haven Clause 1. Window Replacement in Davie covers full-frame vs. retrofit decisions, permit handling, and what to expect during a typical two-day installation.
Impact Windows & Doors in Davie
Full impact-rated perimeter protection for Davie homes in the HVHZ, including laminated glass, reinforced frames, and Miami-Dade NOA documentation for insurance and resale. We specify products by performance tier and price range - not by margin - from PGT, CGI, CWS, and ES Windows. Impact Windows & Doors in Davie details the wind-load ratings, pressure requirements, and inspection documentation your carrier will need.
Sliding & Patio Doors in Davie
Replacement of warped or leaking sliding glass door systems in Davie’s 1980s Florida rooms and rear enclosures, upgraded to HVHZ-compliant multi-panel rollers with proper sill pan and flashing integration. We address the thermal expansion and humidity-driven track failure common in Davie’s inland climate. Sliding & Patio Doors in Davie explains impact-rated vs. non-impact options and the measured survey process for oversized openings.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterWindow Installation in Davie
Most Davie window installation projects involve removing original single-pane aluminum units from 1970s-1990s CBS and ranch homes and installing HVHZ-compliant replacements with proper sill pan, flashing, and structural attachment per Miami-Dade NOA requirements. The town’s pre-1992 housing stock means we frequently encounter out-of-square rough openings, missing or deteriorated nailing fins, and Florida-room additions that were never properly integrated with the primary structure - conditions that demand field measurement rather than catalog ordering. Window Installation at Sightline always begins with the measured survey you keep, and the written quote cannot deviate from that document.
Single & Double Hung Windows
Signs you need it
Your sashes no longer stay open without a prop, you feel air movement around the frame perimeter, or the balance system clatters when you raise or lower the unit - all common in Davie’s 30-50-year-old original aluminum hung windows.
What it costs in Davie
Single and double hung window installation in Davie typically ranges $650-$1,400 per opening for vinyl or aluminum impact-rated units, with wood-clad and premium architectural lines running $1,200-$2,200.
How we do it
We measure the rough opening to 1/8-inch, verify square and plumb, install the new unit on a sloped sill pan with end dams, integrate flashing tape with the weather-resistive barrier, and seal with backer rod and silicone - then photograph every stage for the documented record.
Horizontal Roller Windows
Signs you need it
The sash binds in the track, the rollers grind or flat-spot, or you can lift the sash out of the frame - typical failure modes in Davie’s humidity-cycled aluminum roller units after 25-40 years.
What it costs in Davie
Horizontal roller window installation in Davie generally runs $700-$1,500 per opening for standard sizes, with oversized units and high-rise pressure-rated configurations reaching $1,400-$2,400.
How we do it
We remove the old unit, inspect and repair the sill substrate if moisture intrusion has occurred, set the new roller on a level bed with proper drainage slope, adjust the tandem roller carriage for smooth operation, and verify latch engagement and weatherstrip compression before signing off.
What Window Installation Costs in Davie
| Item | Typical range in Davie |
|---|---|
| Single/Double Hung (standard vinyl/aluminum impact) | $650 - $1,400 |
| Horizontal Roller (standard size) | $700 - $1,500 |
| Horizontal Roller (oversized/high-rise rated) | $1,400 - $2,400 |
Do you pull permits for window installation in Davie?
Yes - Broward County requires a building permit for all window replacements in the HVHZ, and we pull and close out every permit as standard practice, with inspections passed before final invoice. Call (786) 321-3812 to schedule your free measured survey and we’ll verify permit requirements for your specific scope.
How long does window installation take in Davie?
Most Davie homes see 12-22 windows completed across 2-4 working days, with Florida-room additions or full-frame removals adding a day for substrate repair and proper flashing integration. Call (786) 321-3812 for a written timeline with your estimate.
Door Installation in Davie
Davie’s pre-1992 homes routinely retain hollow-core, louvered, or un-rated wood exterior doors that fail current HVHZ impact-resistance and insurance inspection standards, particularly on rear entries facing Florida rooms and screened enclosures. Year-round humidity above 70% rots wood frames and warps door slabs, while daily convective storms test threshold seals and sweep compression that were marginal even when new. Door Installation at Sightline specifies Therma-Tru and ES Windows entry systems by what the opening requires - not by what is in stock - with the written price fixed before any work begins.
Entry Doors
Signs you need it
The door slab rubs the jamb seasonally, daylight shows around the perimeter, or the sweep drags and tears - all indicators that humidity-cycled wood or unsealed steel has exceeded its service life in Davie’s climate.
What it costs in Davie
Entry door installation in Davie typically ranges $1,200-$2,800 for fiberglass or steel prehung units with impact-rated glass options, with solid wood and custom architectural configurations running $2,200-$4,500.
How we do it
We measure the rough opening and verify level, remove the old unit and inspect the sill plate for rot, install the new prehung door on composite shims with structural screws, integrate the sill pan and flashing with the WRB, and adjust strike engagement and weatherstrip compression before documenting the completed assembly.
Hurricane-Proof Front & Entry Doors
Signs you need it
Your insurance carrier has flagged the entry door on wind-mitigation inspection, or you’re replacing a decorative glass lite with no impact rating in an HVHZ-required location.
What it costs in Davie
Hurricane-proof front and entry door installation in Davie generally runs $1,800-$3,500 for NOA-documented fiberglass or steel systems with laminated glass, with multi-point lock and custom panel upgrades reaching $3,000-$5,500.
How we do it
We specify the door and frame assembly from the Miami-Dade or Florida HVHZ approved product list, verify the NOA matches the installation condition, anchor through the frame into the structure per the NOA detail, and provide the documentation your carrier and local inspector require.
What Door Installation Costs in Davie
| Item | Typical range in Davie |
|---|---|
| Entry Door (fiberglass/steel prehung, standard) | $1,200 - $2,800 |
| Entry Door (solid wood/custom architectural) | $2,200 - $4,500 |
| Hurricane-Proof Front & Entry Door (NOA-rated with laminated glass) | $1,800 - $3,500 |
Do I need an impact-rated entry door in Davie?
Yes - Davie’s full inclusion in Broward County’s HVHZ means all exterior doors must carry a Miami-Dade or Florida HVHZ Notice of Acceptance, and inspectors will flag non-rated units on wind-mitigation and resale inspections. Call (786) 321-3812 and we’ll verify the rating requirement for each door location on your home.
Can you match a custom door size in Davie?
We can specify custom-sized entry doors from Therma-Tru and ES Windows lines with 4-6 week lead times, measured to your exact rough opening with the survey you keep and the written price fixed before ordering. Call (786) 321-3812 to schedule measurement for a custom entry door estimate.
Energy-Efficient Windows in Davie
Davie’s original single-pane aluminum windows transmit heat at rates that drive cooling costs 25-40% above what modern glazing packages can achieve, particularly in west- and south-facing ranch homes with minimal roof overhang. The same humidity that degrades seals also forces air-conditioning systems to work harder when solar heat gain overwhelms outdated glass, making energy-efficient replacement a measurable operating cost reduction rather than a comfort preference alone. Energy-Efficient Windows at Sightline are specified by U-factor and SHGC performance - the numbers that determine your actual savings - not by marketing labels alone.
Low-E & Argon Gas Glass
Signs you need it
Your south- or west-facing rooms overheat by mid-afternoon, your AC runs continuously in summer, or you’ve measured window surface temperatures above 90°F - all indicating high solar heat gain through clear single-pane glass.
What it costs in Davie
Low-E and argon gas glass upgrades in Davie typically add $80-$180 per opening to the base window price, with full replacement units including Low-E/argon standard running $750-$1,600 depending on frame material and impact rating.
How we do it
We calculate the orientation-specific SHGC requirement, specify the appropriate Low-E coating from the manufacturer’s performance tables, verify argon fill at the factory with certification, and confirm the labeled U-factor and SHGC match the written scope before installation.
ENERGY STAR Replacement Windows
Signs you need it
You’re replacing windows for insurance compliance and want to capture utility rebate eligibility, or your cooling bills exceed $300 monthly in summer despite a recently serviced AC system.
What it costs in Davie
ENERGY STAR replacement window installation in Davie generally ranges $850-$1,800 per opening for vinyl or aluminum impact-rated units meeting the South climate zone criteria, with premium frame upgrades and custom sizes reaching $1,500-$2,800.
How we do it
We verify the product’s ENERGY STAR certification for the South climate zone, confirm the labeled performance values against your written scope, install with proper air sealing and insulation at the perimeter, and provide the documentation needed for any utility rebate application.
What Energy-Efficient Windows Costs in Davie
| Item | Typical range in Davie |
|---|---|
| Low-E/Argon upgrade (add to base window) | $80 - $180 per opening |
| Full replacement with Low-E/argon standard | $750 - $1,600 |
| ENERGY STAR replacement window (installed) | $850 - $1,800 |
Will energy-efficient windows lower my electric bill in Davie?
Most Davie homeowners see 15-25% summer cooling reduction after replacing single-pane aluminum with Low-E/argon impact-rated units, with payback periods of 6-10 years depending on current usage and FPL rate structure. Call (786) 321-3812 for a free estimate with projected savings based on your home’s orientation and current glazing.
Do impact windows qualify as energy-efficient in Davie?
Yes - many impact-rated laminated glass packages include Low-E coatings and meet ENERGY STAR South zone criteria; we specify from PGT, CGI, and CWS lines that carry both HVHZ and ENERGY STAR certifications so you don’t choose between storm protection and efficiency. Call (786) 321-3812 to review dual-certified options for your project.
Impact Garage Doors in Davie
Davie’s pre-1992 garage doors are typically un-rated, thin-gauge steel or wood panel assemblies that fail HVHZ wind-load requirements and provide no protection against wind-borne debris penetration at the largest opening in most homes. Because the garage door represents 25-30% of the home’s envelope area, its failure in a hurricane event pressurizes the entire structure, making code-compliant replacement a structural safety issue rather than a cosmetic upgrade. Impact Garage Doors at Sightline are specified by design pressure rating and wind-load zone, with Miami-Dade NOA documentation provided for every installation.
Hurricane-Rated Garage Doors
Signs you need it
Your current door has no Miami-Dade NOA label, the panels rattle in moderate winds, or your wind-mitigation inspection specifically flagged the garage door as non-compliant.
What it costs in Davie
Hurricane-rated garage door installation in Davie typically ranges $1,800-$3,500 for a standard 16×7 two-car steel or aluminum impact-rated assembly, with heavy-duty wind-load designs and custom wood-look overlays reaching $3,200-$5,500.
How we do it
We measure the opening and verify the structural attachment condition, specify the door and track assembly from the HVHZ approved product list rated for your wind-borne debris region, install with proper jamb and header anchorage per the NOA detail, and provide the documentation for inspection and insurance filing.
Wind-Load Code Compliance
Signs you need it
You’re selling or refinancing and the buyer’s inspection flagged the garage door, or you’re upgrading after a failed 4-point or wind-mitigation report from your insurance carrier.
What it costs in Davie
Wind-load code compliance upgrades in Davie generally run $2,200-$4,200 when structural reinforcement of the header or jambs is required in addition to the rated door assembly, with complex retrofits involving engineered attachment solutions reaching $4,000-$6,500.
How we do it
We assess the existing framing and attachment points against the NOA structural requirements, engineer any necessary header or jamb reinforcement, install the rated door and track with verified anchorage, and coordinate inspection sign-off before final documentation.
What Impact Garage Doors Costs in Davie
| Item | Typical range in Davie |
|---|---|
| Hurricane-Rated Garage Door (standard 16×7, installed) | $1,800 - $3,500 |
| Hurricane-Rated Garage Door (heavy-duty/custom overlay) | $3,200 - $5,500 |
| Wind-Load Code Compliance (with structural reinforcement) | $2,200 - $4,200 |
Does my garage door need to be impact-rated in Davie?
Yes - Davie’s HVHZ designation requires all exterior openings including garage doors to meet Miami-Dade or Florida HVHZ standards, and un-rated doors will fail wind-mitigation inspections required for insurance renewal and real estate transactions. Call (786) 321-3812 for a free assessment of your current door’s compliance status.
Can you reinforce my existing garage door instead of replacing it?
In most cases no - HVHZ compliance requires a complete rated door and track assembly with documented NOA; retrofit kits for non-rated doors do not meet current Broward County inspection standards and will not satisfy insurance requirements. Call (786) 321-3812 for a written replacement quote with proper documentation.
Custom & Geometric Windows in Davie
Davie’s ranch-era homes often feature distinctive architectural elements - gable-end accent windows, arched openings above entries, and oversized fixed glass in great rooms - that were originally glazed with single-pane annealed glass in thin aluminum frames. These geometric and custom shapes cannot be replaced with standard catalog units, yet they frequently represent the most vulnerable points in the envelope for both hurricane debris penetration and thermal loss. Custom & Geometric Windows at Sightline are measured to the exact radius, chord, or irregular polygon, fabricated from PGT, CGI, or ViewLux impact-rated lines, and installed with the same written-price guarantee as standard rectangles.
Geometric & Shaped Windows
Signs you need it
Your triangular, trapezoid, or octagonal window has fogged between panes, the frame has separated at mitered corners, or you’re replacing an original annealed unit with no impact rating in an HVHZ zone.
What it costs in Davie
Geometric and shaped window installation in Davie typically ranges $1,400-$3,200 per opening depending on complexity and whether the unit is fixed or operable, with multi-piece assemblies and custom grille patterns reaching $2,800-$5,500.
How we do it
We field-measure every angle and radius with digital templates, verify the rough opening is structurally sound for the custom frame, fabricate from the approved HVHZ product line with documented NOA for the specific geometry, and install with integrated flashing appropriate to the non-rectangular sill condition.
Arched & Curved Windows
Signs you need it
The radius top of your arched window has developed a stress crack, the curved frame has pulled away from the wall, or you’re replacing a decorative arch with no structural or impact rating.
What it costs in Davie
Arched and curved window installation in Davie generally runs $1,800-$3,800 for a standard radius top with rectangular base, with full custom curves and oversized architectural configurations reaching $3,500-$6,500.
How we do it
We establish the true radius from field measurement, verify the structural support for the curved header load, specify the arched frame and tempered or laminated glass from the HVHZ approved list, and integrate the curved sill pan and head flashing with the surrounding weather-resistive barrier.
What Custom & Geometric Windows Costs in Davie
| Item | Typical range in Davie |
|---|---|
| Geometric & Shaped Window (standard complexity) | $1,400 - $3,200 |
| Geometric & Shaped Window (multi-piece/custom grille) | $2,800 - $5,500 |
| Arched & Curved Window (radius top with base) | $1,800 - $3,800 |
How long do custom windows take to fabricate for Davie?
Most custom and geometric windows from PGT, CGI, and ViewLux lines require 6-10 weeks from final measurement to delivery, with complex multi-piece assemblies occasionally extending to 12 weeks; we schedule installation within 5 business days of delivery. Call (786) 321-3812 to begin the measured survey and lock your fabrication slot.
Can you match an unusual shape from my original 1970s window?
We can replicate virtually any original geometry in an HVHZ-rated assembly by field-templating the existing opening and fabricating to that exact profile - the constraint is the NOA-approved product line, not the shape itself. Call (786) 321-3812 to schedule template measurement for your specific window.
Brands We Service in Davie
We specify from eight manufacturer lines - PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux - stocked and serviced from our Miami-area logistics point with typical part turnaround of 24-48 hours for standard sizes. Our brands are selected by performance tier and price range for what the opening requires, not by margin.
Pricing for Windows & Doors in Davie, FL
| Service | Typical range in Davie |
|---|---|
| Single/Double Hung Window (standard impact-rated) | $650 - $1,400 |
| Horizontal Roller Window (standard) | $700 - $1,500 |
| Horizontal Roller Window (oversized/high-rise rated) | $1,400 - $2,400 |
| Entry Door (fiberglass/steel prehung) | $1,200 - $2,800 |
| Entry Door (solid wood/custom architectural) | $2,200 - $4,500 |
| Hurricane-Proof Front & Entry Door (NOA-rated) | $1,800 - $3,500 |
| Low-E/Argon upgrade (add per opening) | $80 - $180 |
| Full replacement with Low-E/argon standard | $750 - $1,600 |
| ENERGY STAR replacement window (installed) | $850 - $1,800 |
| Hurricane-Rated Garage Door (standard 16×7) | $1,800 - $3,500 |
| Wind-Load Code Compliance (with reinforcement) | $2,200 - $4,200 |
| Geometric & Shaped Window (standard complexity) | $1,400 - $3,200 |
Price drivers in Davie include HVHZ NOA certification requirements, Florida-room structural integration repairs, and header reinforcement for garage door wind-load compliance - all identified during the measured survey and written into the fixed-price scope before work begins. The written quote and the final invoice are the same document; Haven Clause 1 permits no change orders for conditions we should have caught at survey.
Neighborhoods We Serve in Davie
We work across Davie’s full residential footprint, from the established ranch neighborhoods near Long Key Natural Area to the newer developments along Nob Hill Road and the equestrian-zoned properties west of Flamingo Road. Crews are dispatched from our Miami-area coordination office with scheduling availability typically within 3-5 business days for measured surveys.
- Long Key / Orange Drive area
- Nob Hill corridor
- Flamingo Road equestrian district
- Davie Road / Town Center vicinity
- Hiatus Road residential tracts
Service Area - Cities Near Davie
Sightline crews serve the full Broward and Miami-Dade corridor from our Miami-area dispatch point, with regular project work in Hialeah Gardens, FL, Miami Lakes, FL, Hialeah, FL, and Doral, FL in addition to Davie. Every engagement follows the same Haven Standard: measured survey you keep, written price before work starts, verified crew, documented photo record, and no surprises.
Serving Davie, FL - Our Local Coverage Area
We’re based in the Davie area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Windows & Doors in Davie
Yes - Broward County requires a building permit for all window and door replacements in the HVHZ, including Davie, with inspections for proper flashing, structural attachment, and Miami-Dade or Florida HVHZ NOA compliance. We pull and close out every permit as standard practice; the permit cost is itemized in your written quote.
Most Davie HOAs approve HVHZ-compliant impact replacements when the architectural application includes product samples, NOA documentation, and finish specifications matching the approved palette; we provide the technical submittal package as part of our standard scope. Call (786) 321-3812 and we’ll coordinate directly with your HOA manager if specific forms are required.
Call (786) 321-3812 - answered by a live person 24/7 - or text to request a measured survey; we typically schedule within 3-5 business days, and you’ll receive the written quote within 24 hours of measurement that cannot differ from the survey document you keep.
Call (786) 321-3812 to schedule your free measured survey and written estimate for windows and doors in Davie. Every quote is fixed before work begins, every crew is background-checked and uniformed with license number verified, and every completed job carries the 365-Day Done Right Promise under the Haven Standard.
What happens when you call
- 1A real person answersNo phone trees - talk to a local windows & doors pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Davie Customers Say
"The road noise in the front bedroom is genuinely gone. They recommended the laminated glass and explained why, with figures."
- Delia F."The survey measurements and the quote were the same piece of paper. Nothing changed on install day, which is not what happened with the two other companies we had out."
- Annette R."Patio door had dropped and would not lock. They adjusted it rather than selling me a new one, and charged accordingly."
- Simone T.